MOSCONI PICO 8|10 DSP Endstufe-> 6- und Mehrkanal

729,00 €

Kein Mehrwertsteuerausweis,
da Kleinunternehmer nach §19 (1) UStG.
zzgl. Versandkosten

8 CHANNEL PWM AMPLIFIER WITH INTEGRATED DSP

MOSCONI PICO 8|10 DSP

8 Channel Amplifier
Class D Technology
Built-in 10 channel DSP
Up to 600 watts of total power
12V and 18V versions

ÜBERSICHT MOSCONI PICO 8|10 DSP

Perfect OEM Integration:

Powerful DSP amplifier, optimized for use on factory radios. Six analog inputs up to 30V, flexible routing, 3 x input EQ and delay. With 4 x 50 Watt + 4 x 90 Watt ideal for active and semi-active systems, as well as classic Front + Rear + Sub application. With two digital inputs (SP-Dif and BT+) as well as two processed line-outs, it’s ready for the future.

Converterless High Speed PWM Power Amplifiers

Highly efficient PWM power amplifiers with the fastest carrier frequency currently available in the world (> 2 MHz), enables HiRes audio transmission and the extremely small size. Modulation is done without DAC directly from the DSP’s 96 kHz TDM signal, so the noise floor is close to zero and THD+N ~ 0.02%/1W.

The Pico 8|10 DSP is also available as an 18Volt version. This is specially adapted to the on-board electrical system of the latest Tesla models.

ENTRANCE PAGE:

4 x analog inputs balanced (high-level) up to 30 V
4 x Analog Inputs Switchable (High-Level / Low-Level)
1 x Digital Input SP-Dif optical (8 kHz – 96 kHz sampling rate)
1 x Bluetooth port with SP-Dif – TTL (8 kHz – 96 kHz, e.g. for Mos_BTS Bluetooth streaming module)
1 x Bluetooth extended digital Audio Port (BT+)
(flexible 8 kHz – 384 kHz synchronous digital input for audio sources with 2 – 16 channels, direct DSP access without jitter, e.g. for MOS BTS96k BT streaming module or extended analog inputs)

DSP PART:

912 MHz, 32-bit audio port, 64-bit core
Double Precision 56 Bit Filter Calculation
6144 SIMD instructions per sample at 48 kHz
ASRCs from 1:8 to 7.75:1 ratio and 139 dB DNR

CONTROL:

1 x USB Serial Data (PC/GUI connection)
1 x Remote Connector (analogue, for RTC.2 potentiometer remote control)
2 x Bluetooth control port (connection MOS-BT3.0 (app control), RC-Can (CAN bus control)
1 x Remote Out, 1 x Remote In, Auto-Remote with Highlevel connection
Connections with MOLEX® plug-in contacts
Very small size with low heat generation, ideally suited for installation behind cladding

SOFTWARE:

3 x 9 band parametric input EQ (de-equalizing)
6 x Input Delay 0 – 3 ms / 0.01 ms (De-Delay)
10 x Digital Input Level Controller (Signal Conditioning)
Flexible mixer for signal routing
(side separated, can summarize and subtract, 10 inputs on 4 x 2 output groups)
6 x 30 band or 4 x 30 band + 2 x 15 band group EQ
(parametric, relative phase remains stable)
10 x 10 Band Output Filter
HighPass / LowPass / HighShelf / LowShelf / Notch / Allpass 1st + 2nd Order / Speaker EQ
10 x Speaker Delay 0 – 12 ms, 0.01 ms
10 x Speaker Phase switch

TECHNISCHE DATEN MOSCONI PICO 8|10 DSP

AUSGANGSLEISTUNG / AUSGANGSSEITE:

Ausgangsleistung an 4 Ohm:

4 x 50 Watt (Kanal: 1 – 4) 3-Ohm stabil (nicht brückbar!)
Ausgangsleistung an 4 Ohm:

4 x 90 Watt (Kanal: 5 + 6 / 9 + 10) 2-Ohm stabil / brückbar
Ausgangsleistung an 4 Ohm:

4 x 50 Watt + 2 x 240 Watt (bridged Kanal: 5 + 6 / 9 + 10)
Line Out:

2 x 2 Vrms Line Out Ausgänge (Kanal: 7 + 8)
.

DATEN:

Eingangsspannung:

0,3 – 15 V
Effizienz über alles:

> 80 %
Auto-On (nur High Level):

Off-BTL
Maße:

150 x 160 x 46 mm
Gewicht:

1050 Gramm

MOSCONI PICO 8|10 DSP Endstufe-> 6- und Mehrkanal

MOSCONI PICO 8|10 DSP

ÜBERSICHT MOSCONI PICO 8|10 DSP

ENTRANCE PAGE:

DSP PART:

CONTROL:

SOFTWARE:

TECHNISCHE DATEN MOSCONI PICO 8|10 DSP

AUSGANGSLEISTUNG / AUSGANGSSEITE:

DATEN:

Das könnte dich auch interessieren:

Ground Zero GZUM 80SQ 8cm High End Centerspeaker Breitbänder Sound Quality NEU

Plug&Play Soundsystem Daimler Verstärker Lautsprecher Set Mercedes W124 E-Klasse

Universal Bi-Wiring Bi-Amping Sound Quality Frequenzweichen Weichen Set, 1Paar

20cm High-End Sound Quality Tiefmitteltöner 3 Ohm Bass NEU Lautsprecher 8″ TMT